Design Of Imitation Middle Seam Shoes

The structure of the seam is special, which breaks the closeness of the shoe. When you see the round door, you will think of being round and full. When you see the pointed door, you will think of elegance and elegance. When you see the square door, you will think of being free and easy. When you see a partial door, you will think of something else. Once the structure of the middle opening is encountered, the first thing to see is the integrity of the door is damaged, breaking the tradition and breaking the association, so opening the seam shoe is no longer tender, but has an open personality, so it is often used in the shoes of middle-aged and old women.

The opening and closing structure of female shallow shoes not only has the advantages of material saving, but also can make special changes.

1. design of shoe with saw blade in opening and middle seam
Now, the women's shallow shoes are becoming narrower and narrower, and the problem of material placement becomes a problem. If the back midline is broken and the middle opening structure is adopted, the problem of too much waste can be solved. The middle section of the middle part of the outer part is designed to maintain the curve of the half panel, which coincides with the last curved surface.

There are two sawblade bars at the mouth gate, which are connected inside and outside, mainly for decoration, see figure 3-3-11.

2. design of shoes with mid seam wrinkles
As shown in figure 3-3-12, this is a wrinkled open mid seam shoe. The ordinary wrinkled shoe is designed to fold the wrinkles on the surround strip, but the wrinkles can also be designed by using the opportunity of opening the middle seam.

It is necessary to design the position of the wrinkle and calculate the size of the wrinkle on the structural drawing. When the template is made, the wrinkled part is first made into a replica board, and the cutting edge is cut according to the position of the wrinkle, and the position of the bottom line is reached. Then cut the opening one by one, each open a cut O, draw a contour line, add a wrinkle until all the wrinkles are drawn. That is to lengthen the front band in a certain direction, and the amount of elongation is the amount of wrinkle. The amount of 1~2mm per wrinkle should not be too large. Other designs are with round shoes.