How To Adjust The Time Of Pressing The Shoe On The Bottom Press?

The bottom press is used for outsole pressing of dragon boat bottom, wall bottom sports shoes and casual shoes. Pressing, pressing and pressing can be completed or individually completed at once. The output is large and the bonding is firm. Besides saving labor, it is uniform and effective. It is an automatic pressing equipment for the upgrading of shoemaking industry. Let's take a look at the functions of each part of the press.

1. electric control panel of press machine

　　 Electrical control panel It is the circuit control mechanism of the machine. It controls the machine by setting the control electrical devices on the electrical panel. The left total timer is used to adjust the total time of pressing shoes on the left side of the machine. It is also the time to press ahead, turn right into time, and turn left to reduce time.

The left two pressure and airbag timer are used to set up the functional units on the left side. Pressing shoes The time.

The left swinging switch is turned left, and the left swinging mechanism will not be swaying after stepping on the foot switch.

The left pressure switch, the right turn switch will close the left air pressure system of the machine.

Oil pump motor start switch; press switch to start oil pump motor.

Power switch; turn right switch to power.

Power indicator lamp; after the power switch of the machine is opened, the indicator lights up, indicating that the machine has been electrified.

Oil pump motor stop switch; press switch oil pump motor to stop working.

Right total timer: used to adjust the total time of pressing shoes on the right side of the machine.

Right two pressure and airbag timer: used to set up the right functional units on the right side of the machine.

2. the time pressed by the press.

Right swing switch: turn the switch to the left, and the right swing mechanism will not be swaying after stepping on the foot switch.

Right air pressure switch: the right turn switch will turn off the right air pressure system of the machine.

3. shoe machine head holder mechanism

The pressing head seat mechanism is the main pressing mechanism of the machine, and its main function is to pressurize the shoes after the large oil cylinder and the airbag mechanism rise.

The pressure head bar locks the nut tightly; the locking head mechanism is prevented from loosening and slipping.

Push pull rod; adjust the distance between the two pressing heads.

Balance the tubing; balance the two head bar to make the pressure evenly around.

Press the head bar to fix screws and fix the head bar to avoid the automatic slipping of the pressure head lever.

Front pressure head rod;

Rear pressure head rod;

Rear presser foot; press the last part of shoe last.

Front presser foot; press the front part of the shoe.

Adjustment of the 4. head seat mechanism:

Adjust the distance between the front and rear pressure heads, first place a shoe last on the large seat mechanism, then release the pressure bar and lock the nut tightly, then pull the push rod according to the length of the shoe type or the shoe, and push the pressure head bar to the correct one. Press shoe location Finally, tighten the locking nut.

Adjust the length of the front pressure bar, slightly release the screw fixing screws, and note that all screws must not be screwed out, and then the hand press the pressing head and the foot lightly to pull out. The force head must not be exerted too much. At the same time, the pressure head rod has a certain range of travel. When it is found that it can not be pulled, it is at the end of the stroke.

The length of the rear pressure head is adjusted; the length of the rear pressure head is similar to that of the front pressure head rod.